MB STAR C6 Multiplexer OEM DOIP Xentry Diagnosis Tool

Lots of customer encounter setting problem when using MB STAR C6 diagnosis, so we recommend this bundling sale for those customer who want once get in hand then can use it directly. We will install and activate for you ready to use. What's more, this package offer saves you money than buying

Software Version: V2020.06（Xentry and DAS）

Support Multi-Language:(Default language is English, if you want other languages, please leave message)English/Bulgarian/Danish/Greek/Spanish/French/Italian/Korean/Polish/Romanuan/Serbo-Croatian/Turkish/Czech/German/Finish/Hyngarian/Japanese/Dutch/Portuguese/Russian/Swedish/Chinese

The Mercedes Benz Xentry diagnosis VCI DOIP Pass thur interface C6 does not have its own PC core, battery, fan, or display. It is operated using the VXDIAG For XENTRY Diagnosis Pad via WLAN or a USB cable connection.

Mercedes Benz C6 OEM Xentry diagnosis VCI DOIP Pass thur interfac is the latest interface for For Mercedes & SMART vehicles can replace Star C4/C5. XENTRY Diagnosis VCI acts as a Pass-through Interface, also called MB Star C6, For Benz C6 multiplexer to provide complete communication between a vehicle and the XENTRY software loaded on a PC.
Mercedes Benz Xentry diagnosis VCI DOIP Pass thur interface Benz C6 Overview:
Compatible Software: VXDIAG For XENTRY/Das Software
Support Vehicle: Mercede For Benz & Smart vehicles
DoIP: Support DoIP

Functions: Star Diagnostic & programming (SCN Coding)

Mercedes Benz Xentry diagnosis VCI DOIP Pass thur interface C6 Features:
Can be used for all model series of For Mercedes For Benz vehicles
Support DoIP, cover more functions during SCN Coding than SD C4/C5
Functions including diagnosing, programming, simulation studying, repair information, automotive maintenance, technical service bulletin and so on
Diagnosis updates no longer necessary – firmware updates required on rare occasions
Does not need a power supply unit for external power supply
Dandy multiplexer with a small, sturdy construction (no PC core, battery, fan, or display)
Engines (All Gasoline & Diesel Systems)
Transmissions and Electronic Selector Modules
Airmatic and Active Body Control Suspension Systems
Traction Systems: ESP / ASR / ETS / ABS / BAS / SBC braking systems
Supplementary Restraint Systems (SRS) / Airbag, All body modules OCP / UCP / LCP / SCM / SKF / KFB / RCM / DCM’s
Drive Authorisation System
Sam (Signal Acquisition) Modules
Electronic Ignition System (EIS)
Pneumatic System Equipment and ATA functions
Air Conditioning / climate control Systems
Instrument Cluster
Tyre Pressure Control
Parktronic System
Keyless Go
D2b Command & Audio Gateway (D2B and MOST networks)
TV Tuner
Headlamp Range Adjustment
Seat Electronics
Rvc, RST & Vario Roof modules
Automatic Clutch System ACS
M-Class Body Modules (AAM / EAM / DAS / SEM / VG Transfer Case)

Assyst & ASSYST + systems

Mercedes Benz Xentry diagnosis VCI DOIP Pass thur interface C6 Summary:
Mercedes Benz Xentry diagnosis VCI DOIP Pass thur interface C6 (Vehicle Communication Interface) multiplexer serves as the interface to the vehicle when performing diagnosis and repairs, and programming electric and electronic on-board vehicle systems.

Second Hand Laptop Lenovo X220 Specification:
Brand: Lenovo
Condition: Used
Type:  Laptop/Notebook
Screen Size:  14.0
Processor Type:  Intel (R) Core(TM) I5-2520M CPU
Processor Speed:  2.50 GHz
Memory: 4GB
Hard Disk：500G HDD

Package list:
1pc x MB STAR C6 Multiplexer
1pc x OBDII Cable
1pc x Lan Cable
1pc x Second Hand Laptop Lenovo X220 Laptop （All software activated. All system ready to use）

John Deere Service Advisor EDL V2 Diagnostic Kit

John Deere Service Advisor EDL V2 Diagnostic Kit
1.V4.0 software： Support Languages: English
2.V4.2 software： Support Languages: English, French, Italian, Spanish, Portuguese
Notice:
If you want to do 3038E truck,then need to use V4.2 software (Hardisk Version).
John Deere Service Advisor EDL (Electronic Data Link) heavy duty diagnostic adapter for construction equipment, agriculture, engines John Deere.
What are John Deere (DTAC) solutions?
There are two versions of JD Service Advisor available at the moment: 4.2 release – full offline desktop application – support for this version was discontinued in January 2017. System requirements of that version were much lower than for SA 5.2. It comes as Agricultural, Construction & Forestry, Commercial & Consumer, and Power Systems Equipment divisions. Each Division consists of actual models from 2000 release year and historical data from the 1950’s till the 2000 year. John Deere Service Advisor v5.2 is the version that completely replaced SA v4.2 starting 2017 year. Entirely new interface design with bigger system requirements. Currently available in two editions: Agriculture and Turf equipment, Construction and Forestry.
What is the difference between SA 4.2 and 5.2?
The main difference is that now SA 5.2 using web browser Internet Explorer instead of application shell which is more convenient for the most users. JD SA 5.2 is fully compatible with Windows 10 including EDL v2 KIT. JD Service Advisor 5 no longer needs DATA DVDs with models data or Historical information. All the files are available on a USB Stick or HDD and can be easily accessed via SA web search. So you no longer need to play with dozen DVDs to be able to get a proper manual or DTAC solution. On that note, I’d like to introduce you JS Service Advisors system requirements.
Available divisions of Service ADVISOR 4.2
John Deere Service Advisor 4.2 System requirements:
– O.S.: Windows XP; Windows Vista; Windows 7; Windows 8
– CPU: Pentium/Athlon 1.8 GHz or higher
– RAM: 256 MB of system memory
– Hard Drive: 10 GB of available space
– DVD-ROM(optionally)
Available divisions of Service ADVISOR 5.2
John Deere Service Advisor 5.2 System requirements:
– O.S.: Windows 7 Pro/Ultimate; Windows 8 Pro, Windows 8.1 Pro, Windows 10 Pro
– CPU: Any CPU for Windows platform
– RAM: 8 GB of system memory
– Hard Drive: 150 GB of available space
As you can see, the system requirements are significantly different. This information will help you choose in favor of 4.2 or 5.2 version.
Currently, there are four original versions of Heavy Duty Scanner John Deere Service ADVISOR 4.2 application:
John Deere Service Advisor 4 (4.2.005) Agricultural Equipment,
Construction & Forestry Equipment,
Commercial & Consumer Equipment,
Power Systems and OEM Engines

C6 OEM DOIP Xentry Diagnostic VCI Plus V06/2020 MB Star XENTRY Software 500GB HDD with Keygen

Product Description
OEM DOIP Xentry Diagnosis VCI Multiplexer serves as the interface to the vehicle when performing diagnosis and repairs, which can work on DOIP vehicles.

C6 OEM DOIP Xentry Diagnostic VCI Plus V06/2020 MB Star XENTRY Software 500GB HDD with Keygen
Benz C6 OEM Xentry diagnosis VCI DOIP Pass-through interface is the latest interface for Benz & Smart vehicles, which can replace Star C4/C5. XENTRY Diagnosis VCI acts as a Pass-through Interface, also called MB Star C6, provides a complete communication between a vehicle and the XENTRY software loaded on a PC.
C6 Xentry diagnosis VCI Pass-through interface for Benz  Overview:
Compatible Software: VXDIAG For XENTRY/ DAS Software
Support Vehicle:  Benz & Smart vehicles
DoIP: Support DoIP
Functions: Star Diagnostic & Programming (SCN Coding)
Attention:
Work on cars and trucks after year 2014
Doesn’t have DAS.
Please install the 500GB HDD on laptop above 4GB Memory and I5 CPU, and use it on one laptop only.
Benz Xentry diagnosis VCI DOIP Pass thur interface C6 can’t support all key lost, it needs one key at least.
Xentry diagnosis VCI DOIP Features:
Can be used for all series model of Benz vehicles
Support DoIP, cover more functions than SD C4/C5 during SCN Coding
Functions including diagnosing, programming, simulation studying, repair information, automotive maintenance, technical service bulletin and so on
Diagnosis updates no longer necessary – firmware updates required on rare occasions
Does not need a power supply unit for external power supply
Dandy multiplexer with a small, sturdy construction (no PC core, battery, fan, or display)
Engines (All Gasoline & Diesel Systems)
Transmissions and Electronic Selector Modules
Airmatic and Active Body Control Suspension Systems
Traction Systems: ESP / ASR / ETS / ABS / BAS / SBC braking systems
Supplementary Restraint Systems (SRS) / Airbag, All body modules OCP / UCP / LCP / SCM / SKF / KFB / RCM / DCM’s
Drive Authorisation System
Sam (Signal Acquisition) Modules
Electronic Ignition System (EIS)
Pneumatic System Equipment and ATA functions
Air Conditioning / climate control Systems
Instrument Cluster
Tyre Pressure Control
Parktronic System
Keyless Go
D2b Command & Audio Gateway (D2B and MOST networks)
TV Tuner
Headlamp Range Adjustment
Seat Electronics
Rvc, RST & Vario Roof modules
Automatic Clutch System ACS
M-Class Body Modules (AAM / EAM / DAS / SEM / VG Transfer Case)
Assyst & ASSYST + systems
C6 Xentry diagnosis VCI DOIP Pass thur interface Summary:
Benz Xentry diagnosis VCI DOIP Pass thur interface C6 (Vehicle Communication Interface) multiplexer serves as the interface to the vehicle when performing diagnosis and repairs, and programming electric and electronic on-board vehicle systems.
Benz Xentry diagnosis VCI DOIP Pass thur interface C6 does not have its own PC core, battery, fan, or display. It is operated using the VXDIAG For XENTRY Diagnosis Pad via WLAN or a USB cable connection.
Package list:
1pc x MB STAR C6 Multiplexer
1pc x OBDII Cable
1pc x Lan Cable
1pc x Second Hand Laptop Lenovo X220 Laptop （All software activated. All system ready to use）

Heavy Duty Scanner John Deere Service

1.What is John Deere Service Advisor(SA)?

1.1 John Deere Service Advisor 4.2 System requirements
1.2 John Deere Service Advisor 5.2 System requirements
2 What are John Deere (DTAC) solutions?
3 What is the difference between SA 4.2 and 5.2?
4 Available divisions of Service ADVISOR 4.2
5 Available divisions of Service ADVISOR 5.2
6 Where to buy John Deere Service ADVISOR Online?
7 How to install John Deere Service ADVISOR?
8 Shop John Deere Service ADVISOR
1.What is John Deere Service Advisor(SA)?
What is the first step in John Deere tractor repair and maintenance process? Of course, it’s dealer level repair and diagnostic software and hardware package  — John Deere Diagnostics Kit repair and diagnostic kit full version.  Good question: what is john deere service advisor? We got it covered!

JD Service ADVISOR — is windows desktop application and diagnostic adapter kit which allows you: to connect with the vehicle and get maximum possible analysis from the error log, change some factory parameters, connect with the tractor and get maximum reasonable analysis such as:
Read diagnostic trouble codes,
Shift some factory parameters,
Make tests and calibrations,
Program controllers.
From the other hand, JD Service Advisor is a database of repair, technical manuals, diagnosis and test manuals and dealer technician assistance center (DTAC) solutions – DTAC is the way frequently asked questions are answered, and those answers are shared with Deere dealerships. Information that does not get into the current version of a manual or solutions to problems with equipment that needs to be shared with all dealerships is added to DTAC, so technicians have access to the most current information to service Deere equipment.
The second important part of Service Advisor John Deere diagnostic kit is an edl v2 adapter and cables. So you’re able to connect your PC / laptop with installed Service Advisor application to the tractor engine.
2 What are John Deere (DTAC) solutions?
There are two versions of JD Service Advisor available at the moment: 4.2 release – full offline desktop application – support for this version was discontinued in January 2017. System requirements of that version were much lower than for SA 5.2. It comes as Agricultural, Construction & Forestry, Commercial & Consumer, and Power Systems Equipment divisions. Each Division consists of actual models from 2000 release year and historical data from the 1950’s till the 2000 year. John Deere Service Advisor v5.2 is the version that completely replaced SA v4.2 starting 2017 year. Entirely new interface design with bigger system requirements. Currently available in two editions: Agriculture and Turf equipment, Construction and Forestry.
3 What is the difference between SA 4.2 and 5.2?
The main difference is that now SA 5.2 using web browser Internet Explorer instead of application shell which is more convenient for the most users. JD SA 5.2 is fully compatible with Windows 10 including EDL v2 KIT. JD Service Advisor 5 no longer needs DATA DVDs with models data or Historical information. All the files are available on a USB Stick or HDD and can be easily accessed via SA web search. So you no longer need to play with dozen DVDs to be able to get a proper manual or DTAC solution. On that note, I’d like to introduce you JS Service Advisors system requirements.
4 Available divisions of Service ADVISOR 4.2
John Deere Service Advisor 4.2 System requirements:
– O.S.: Windows XP; Windows Vista; Windows 7; Windows 8
– CPU: Pentium/Athlon 1.8 GHz or higher
– RAM: 256 MB of system memory
– Hard Drive: 10 GB of available space
– DVD-ROM(optionally)
5 Available divisions of Service ADVISOR 5.2
John Deere Service Advisor 5.2 System requirements:
– O.S.: Windows 7 Pro/Ultimate; Windows 8 Pro, Windows 8.1 Pro, Windows 10 Pro
– CPU: Any CPU for Windows platform
– RAM: 8 GB of system memory
– Hard Drive: 150 GB of available space
As you can see, the system requirements are significantly different. This information will help you choose in favor of 4.2 or 5.2 version.
Currently, there are four original versions of Heavy Duty Scanner John Deere Service ADVISOR 4.2 application:
John Deere Service Advisor 4 (4.2.005) Agricultural Equipment,
Construction & Forestry Equipment,
Commercial & Consumer Equipment,
Power Systems and OEM Engines
If you are interesting in John Deere Service, please visit our website:www.cnautotool.com

CAT Caterpillar ET 2020A Electronic Technician Diagnostic Software

Caterpillar electronic technician 2020A (2019C )is an updated version of the caterpillar dealer diagnostic software.

The Built-in Factory Password Generator
The experimental feature allows you to decode (18-Bit passwords not supported) factory passwords
Cat works with the Heavy Duty Diagnostic tools Caterpillar Communication Adapters family.
The recommended adapter is a Caterpillar Communication Adapter III Kit PN 538-5051 (Replaces 466-6258).
This diagnostic app allows you to: Change vehicle’s parameters Lock / Unlock parameters Diagnose and reconfigure Reading of error codes ECM Flash
Recently, we have received a lot of questions about the most convenient way to obtain this product.
As soon as payment is done you will be redirected to the download page.
The Electronic Technician application can be easily downloaded.
The small file size(500Mb) allows you to get and set up the app within up to 20 minutes even with the slow internet connection or mobile internet.
The activation takes like 5 minutes and you’re ready to go.
Error When Launching Service Tool
There is a Microsoft issue with upgrading libraries during an installation involving certain versions of the C++ redistributable. After a successful service tool installation, when trying to run the service tool for the first time, one of the following errors may occasionally appear: “The entry point could not be located in api-ms-win-crt-runtime” or “The program can’t start because mfc140u.dll is missing from your computer.” If either of these messages is displayed, follow the procedure below. This procedure requires administrator rights.
1. Open the Start Menu
2. Click the Control Panel
3. Click the “Programs and Features” icon. If there is only a “Programs” icon, click the “Uninstall a Program” link next to the icon.
4. Find the program entry for either “Microsoft Visual C++ 2015 Redistributable (x86) – 14.0.24215” or “Microsoft Visual C++ 2015 Redistributable (x86) – 14.0.242151”
5. If the specified program entry is not found, proceed directly to step 8
6. If the specified program entry is found:
a) Right-click the specified program entry
b) Click the Change menu item
c) Click the Repair button in the dialog that appears
d) Verify that the service tool runs properly
7. If the service tool still displays an error after the Repair operation:
a) Right-click the specified program entry
b) Click the Uninstall menu item
8. Click the link below to download an x86 version of the runtime package from Microsoft.
https://download.microsoft.com/download/6/A/A/6AA4EDFF-645B-48C5-81CC-ED5963AEAD48/vc_redist.x86.exe
9. Install the downloaded package
10. Verify that the service tool runs properly
11. If the service tool still displays an error, please send an email to the support department.
Caterpillar ET Getting Started Guide in PDF Format
What’s New – 2020A
Product Status Report Updates
The Product Status Report has been updated to include throttle configuration information.
Built-in Factory Password Generator
The experimental feature allows you to decode (18-Bit passwords not supported) factory passwords
What’s New – 2019C
Indication of Selected Communications Adapter
The service tool now displays the selected communications adapter when the service tool is disconnected. The adapter name is displayed in the status area at the bottom right of the service tool window.
End of Support for Windows 7
Microsoft is ending extended support for Windows 7 as of January 2020. The service tool will be ending support for Windows 7 as of the 2020A release.
What’s New – 2019B
Automatic Product Status Report (PSR) Upload
The service tool includes a new tool that automatically uploads Product Status Reports. The tool scans for newly generated Product Status Reports and uploads them when an internet connection is available. The default is that automatic report uploading is enabled. The Preferences dialog has an option to disable the tool.
What’s New – 2019A
ECM Naming Changes
Certain ECMs connect to the service tool over two data links at the same time. The service tool shows a message popup when the ECM is only detected on one link. The service tool has been changed to add the text **INCOMPLETE** in the ECM name when the connection is incomplete. Service tool features that display a connection icon also use a new icon for an incomplete connection.
What’s New – 2018C
No significant new features or feature enhancements
What’s New – 2018B
CEOS Fleet Configuration File TOP
A CEOS (Customer Electronic Option Selection) Fleet Configuration File can be created/modified for an engine using the Service Tool. This is available in connected and disconnected mode.
What’s New – 2018A
Trainer Update – 988K XE Wheel Loader
The 988K XE Wheel Loader has been added to the Trainer application.
What’s New – 2017C
Preferences Option to Save a Product Status Report to PDF
The Preferences dialog for the Product Status Report has changed. The dialog contains a new checkbox to automatically save a Product Status Report as a PDF file when the report is created. The service tool will continue to automatically save Product Status Reports as an XML file.
What’s New – 2017B
Product Status Report Updates
The Product Status Report has been updated to include certain history features supported by the ECM, such as the after-treatment Regeneration History and the Service Test History.
Winflash Screen Update
The screen for the Winflash feature has been updated. A new Expand All button opens all sections of the screen to show all details for ECMs detected by WinFlash. A new Collapse All button hides all sections of the screen, except for header rows showing detected ECM names.
PC, Communication Hardware, and Cable Requirements
To run the service tool, the next PC, communication hardware, and cable requirements must be met. NOTE: The minimum PC Configurations should not be used as a standard when buying new personal computers for service tool purposes. If the existing equipment meets these minimum requirements, it will run the service tool.
PC Requirements
Recommended Configurations
PC containing a 2.0 GHz dual-core processor
3GB RAM
3GB of the available hard disk drive
DVD-ROM drive (optionally)
15.4-inch XGA Screen (1280×1024 compatible)
Microsoft Windows? 7 Professional or Windows 8 Professional, Windows 10 Professional (Not tested with Home Edition) (Note: Windows 8 RT is not supported)
RS232 port with 16550AF UART or compatible (for use with Comm Adapter II)
USB 1.1 or 2.0 port (for use with Comm Adapter 3)
Ethernet RJ45 connector
Built-in pointing device or mouse
For security purposes, Microsoft Internet Explorer version 11 or newer or Microsoft Edge is recommended.
Note: The most recent version of Microsoft Internet Explorer may not be validated to work with the service tool.
Wi-Fi (for the Wireless Comm Adapter 3)
Minimum Configurations
PC containing a Pentium 2 GHz processor or greater
1GB RAM
500MB of an available hard disk drive
CD-ROM drive
Super VGA monitor or display (1024×768)
Microsoft Windows? 7 Professional or Windows 8 Professional, Windows 10 Professional (Not tested with Home Edition) (Note: Windows 8 RT is not supported)
RS232 port with 16550AF UART or compatible (for use with Comm Adapter II)
USB 1.1 or 2.0 port (for use with Comm Adapter 3)
Ethernet RJ45 connector
Built-in pointing device or mouse
For security purposes, Microsoft Internet Explorer version 9 or newer is recommended. Note: The most recent version of Microsoft Internet Explorer may not be validated to work with the service tool.
Communication Hardware
Caterpillar Communication Adapter III Kit PN 538-5051 (Replaces 466-6258)
Configuring Cat Electronic Technician to use the Communication Adapter 3
For Cat Electronic Technician to work with the Communication Adapter 3, the settings must be changed to select the Communication Adapter 3 as the Communication Interface Device:
Step 1 Start Cat Electronic Technician.
Step 2 Click the Stop Connect button when it appears.
Step 3 Select the utility menu.
Step 4 Choose “Preferences > Modify…”.
Step 5 Select the Communications tab.
Step 6 Select Cat Comm Adapter 3 (RP1210) and click OK.
NOTE: Because a growing number of products require multiple data link service, the “Enable Dual Datalink Service” checkbox has been pre-selected.
Servicing ECMs on more than one data link requires this checkbox to be enabled.
Failure to do this will result in undetected ECMs and reduced functionality.

AUDIO Mercedes BENZ C6 Diagnosis tool PLUS lenovo X220 Laptop

Lots of customer encounter setting problem when using MB STAR C6 diagnosis, so we recommend this bundling sale for those customer who want once get in hand then can use it directly. We will install and activate for you ready to use. What’s more, this package offer saves you money than buying
Software Version: V2020.06（Xentry and DAS）
Support Multi-Language:(Default language is English, if you want other languages, please leave message)English/Bulgarian/Danish/Greek/Spanish/French/Italian/Korean/Polish/Romanuan/Serbo-Croatian/Turkish/Czech/German/Finish/Hyngarian/Japanese/Dutch/Portuguese/Russian/Swedish/Chinese
The Mercedes Benz Xentry diagnosis VCI DOIP Pass thur interface C6 does not have its own PC core, battery, fan, or display. It is operated using the VXDIAG For XENTRY Diagnosis Pad via WLAN or a USB cable connection.
Mercedes Benz C6 OEM Xentry diagnosis VCI DOIP Pass thur interfac is the latest interface for For Mercedes & SMART vehicles can replace Star C4/C5. XENTRY Diagnosis VCI acts as a Pass-through Interface, also called MB Star C6, For Mercedes Diagnostic Tool Benz C6 multiplexer to provide complete communication between a vehicle and the XENTRY software loaded on a PC.
Mercedes Benz Xentry diagnosis VCI DOIP Pass thur interface Benz C6 Overview:
Compatible Software: VXDIAG For XENTRY/Das Software
Support Vehicle: Mercede For Benz & Smart vehicles
DoIP: Support DoIP
Functions: Star Diagnostic & programming (SCN Coding)
Mercedes Benz Xentry diagnosis VCI DOIP Pass thur interface C6 Features:
Can be used for all model series of For Mercedes For Benz vehicles
Support DoIP, cover more functions during SCN Coding than SD C4/C5
Functions including diagnosing, programming, simulation studying, repair information, automotive maintenance, technical service bulletin and so on
Diagnosis updates no longer necessary – firmware updates required on rare occasions
Does not need a power supply unit for external power supply
Dandy multiplexer with a small, sturdy construction (no PC core, battery, fan, or display)
Engines (All Gasoline & Diesel Systems)
Transmissions and Electronic Selector Modules
Airmatic and Active Body Control Suspension Systems
Traction Systems: ESP / ASR / ETS / ABS / BAS / SBC braking systems
Supplementary Restraint Systems (SRS) / Airbag, All body modules OCP / UCP / LCP / SCM / SKF / KFB / RCM / DCM’s
Drive Authorisation System
Sam (Signal Acquisition) Modules
Electronic Ignition System (EIS)
Pneumatic System Equipment and ATA functions
Air Conditioning / climate control Systems
Instrument Cluster
Tyre Pressure Control
Parktronic System
Keyless Go
D2b Command & Audio Gateway (D2B and MOST networks)
TV Tuner
Headlamp Range Adjustment
Seat Electronics
Rvc, RST & Vario Roof modules
Automatic Clutch System ACS
M-Class Body Modules (AAM / EAM / DAS / SEM / VG Transfer Case)
Assyst & ASSYST + systems
Mercedes Benz Xentry diagnosis VCI DOIP Pass thur interface C6 Summary:
Mercedes Benz Xentry diagnosis VCI DOIP Pass thur interface C6 (Vehicle Communication Interface) multiplexer serves as the interface to the vehicle when performing diagnosis and repairs, and programming electric and electronic on-board vehicle systems.
Second Hand Laptop Lenovo X220 Specification:
Brand: Lenovo
Condition: Used
Type:  Laptop/Notebook
Screen Size:  14.0
Processor Type:  Intel (R) Core(TM) I5-2520M CPU
Processor Speed:  2.50 GHz
Memory: 4GB
Hard Disk：500G HDD
Package list:
1pc x MB STAR C6 Multiplexer
1pc x OBDII Cable
1pc x Lan Cable
1pc x Second Hand Laptop Lenovo X220 Laptop （All software activated. All system ready to use）

Porsche PIWIS Tester III Software Update to V38.900

Latest version Porsche PIWIS III V38.900 is verified working with VXDIAG Porsche Tester III. The Professional Diagnostic Tools Piwis 3 works rather well compared to the Piwis 2.

Version: V38.900.000, Nov. 2019

Language: English, US English, German, French, Italian, Spanish, Japanese, Chinese, Russian, Portuguese

Operating system: Lenovo T440P Laptop Windows 7

Update method: by sending back the 240G SSD or purchasing a new SSD

What’s new in PIWIS III 38.900?

Porsche Piwis Tester III 38.900 with for the experts the developer/engineering mode activated to code without passing through the Porsche server.

Older software version 38.400 with unlimited activation, with a full engineering menu. You can install a fresh version, 38.900 (the engineering menu has been cut down). Equipment tested, ready to go.

How to Connect Porsche Tester III with Vehicle and PC?

Package Listing :
1× Piws3 Tester
1× OBDII Cable
1× USB Cable
1× 256GB Software SSD
1× Lenovo S1 yoga12 I 4600U 8GB

How to Register and Download the Software for OBDSTAR X300 DP PLUS

OBDSTAR X300 DP Plus is a new Android-based vehicle trouble diagnostic device developed for internet applications. It with strong functions can support most brands cars .
Today , lets introduce how to register and download the software with OBDSTAR X300DP Plus .
1.Register steps
First , click VCI from the main unit, VCI
select “User information” in “Settings” menu, then enter user registration window as shown below:

Then Fill in the information in each field (Items with * must be filled). After inputting, tap “OK”. If you have registered to be a member, click “the user information” to enter user login page.

Register finished .
2.Downloading software
Enter the diagnosis software main interface, tap the “One Key Upgrade” to enter one key upgrade page, as following picture shown:


Tap “One Key Upgrade” to start downloading, enter main interface after finishing downloading. (Notes: Ensure internet connection is normal when updating. Besides, because of many software, it may take several minutes, please wait patiently) If need to cancel a software, just tap corresponding Check Box as following picture shown:

Then Software download completed .
For more request , welcome to contact us any time

How to Activate OEM Porsche PIWIS III Developer (Engineer) Mode?

How to enable OEM Porsche PIWIS III to Developer (Engineer) Mode on Panasonic CFAX3 Laptop?
For Newer Porsche Models:
Go to Home->System->Diagnostic configuration for 991, 981, 918, 970, Cayenne from MY11, Macan
Go to Mode tab
Set Operating Mode to E




3 Modes available:
V mode: Standard After-sales Mode for Porsche Piwis 3 ordinary diagnostics
E mode: Development Mode for Piwis III engineering software functions
P mode: Production for supplier data information (Customers no need work on P mode) and save setting

For Older Porsche Models:
Go to Home->System->Diagnostic configuration for other models-> Mode->Operate Mode->E (Engineer Mode)->Save
to activate Development mode.

John Deere Service Advisor EDL V3 Electronic Data Link with SA 4.2 Software

John Deere Service Advisor EDL V3 Electronic Data Link Heavy Duty Truck Diagnostic Scanner with SA 4.2 Software

This is the John Deere Service Advisor EDL V2 Diagnostic Kit. This is the newest adapter from John Deere, and it replaces the John Deere EDL v2.
Top 6 Reasons to get John Deere EDL V3 Adapter:
1) Latest version 4.2 Agriculture & Construction and Forestry，John Deere can support vehicle to year 2016
2) 1 year warranty
3) Online technical service by teamviewer if you have any issue
4) Real test with Jd and 100% work greatly
5) Multi-Languages: English, French, German, Italian, Portuguese, Russian, Spanish.
6) John Deere EDL V3 is compatible with specialize software dealer JD.
What are the the advantages of Heavy Duty Truck Scanner EDL V3 Data Link?
Improvements on EDL v3
Improved USB connector utilizing automotive grade latching system
Increased memory RAM
Improved vehicle communications processor
Support of multiple 500K baud rate CAN Bus recordings
Longer range wireless connectivity
Improved Bluetooth connection speeds utilizing Bluetooth 2.1 with EDR (J1939 compliant)
Functions and technical capabilities of JD diagnostic adapter:
Troubleshooting;
Setup and Calibration ECU;
Interactive tests;
Computer programming;
Diagnostic Code Reader, and much more.
This scanner is compatible with specialize software dealer JD.
It’s include 3 software and you can choose two free(AG+CF 4.2 or AG+CCE 4.2）we will installed software before delivery then you can use when pick up
1) JD Service Advisor 4.2 AG (Agriculture)
2) JD Service Advisor 4.2 CCE (Commercial and Consumer Equipment)
3) JD Service Advisor 4.2 CF (Construction and Forestry)
We will tested before shipping out, but if you are not sure whether it can support or not then pls tell us your john deere model and year so that we can confirm to you before make purchase.
EDL V3 compatible with 4.2 version software
1) John Deere Service Advisor ag (Agriculture) workshop service manual, repair manual, electrical wiring diagram, hydraulic diagram, diagnostic, assembly and disassembly engine, transmission.
2) John Deere Service Advisor CCE (Commercial and Consumer Equipment)dealer technical assistance, diagnostics, connection readings, calibrations, interactive tests, specification, tools, assemble and disassemble presented all models John Deere Construction Equipment and some models Hitachi, Euclid, Bell and Timberjack.
3) John Deere Service Advisor CF (Construction and Forestry) workshop service manual, repair manual, diagnostic, electrical wiring diagram, hydraulic diagram John Deere.

CAT Caterpillar ET Diagnostic Adapter III PLUS DELLd630 laptop （Real Caterpillar ET3 Adapter III）

we will install the software before ship, so you can get it work directly after you receive it.
Caterpillar Diagnostic Scanner as Cat Caterpillar ET 2015A Software update version, 2019C Caterpillar Electronic Technician softwarer With CAT ET 3 Cat caterpillar adapter 3 support caterpillar diagnostic till 2018.
Cat et Caterpillar Electronic Technician Software 2019C V1.0:
Type of catalogue: Caterpillar Electronic Technician Diagnostic Software
Make: Caterpillar
Region: WorldWide all region
Inclusive languages: English, Chinese, Danish, French, German, Italian, Japanese, Portuguese, Russian, Spanish

Caterpillar ET Software 2019C Function:
This diagnostic app allows you to:
View active and logged diagnostics.
View events where irregularities occurred and were logged by the ECM.
View the status of a group of parameters (temperatures, pressures, etc.) simultaneously.
Record and log performance data.
Graph a group of status parameters.
View the current configuration of an ECM.
Change ECM configurations.
Perform diagnostic tests.
Perform calibrations.
Print reports and diagnostic results.
Please keep in mind that some ecm settings for example, speed limit requires factory password. The factory password generator is not included in this application
Package :
1.Used Dell D630 laptop
2.Real CAT et3 Comm Adapter III(it's best quality cat et 3,not adapter 2,please check Communication port)
3.USB Cable (From device to your computer)
4.J1939/J1708 Cable (from device to your truck)
Original Factory Caterpillar ET3 Adapter III Compare With OEM Caterpillar ET Diagnostic Adpater III
1. Original Factory CAT ET can use once pluged, no need install the USB drive, the software can automatic realize it for ET3 Adapter, and the machine can automatic weld the high quality Circuit board, quality will be more reliable.
2. The OEM Caterpillar ET Diagnostic Adapter III need use USB Drive to install, and need choose the COM Port, and  in the software ET also need choose ET2 then can be used.
The Details as follows:



Package 1 :
1.Used Dell D630 laptop
2.Real CAT et3 Comm Adapter III(it's best quality cat et 3,not adapter 2,please check Communication port)
3.USB Cable (From device to your computer)
4.J1939/J1708 9PIN Cable (from device to your truck)
5.6PIN Cable (for old truck)

Package 2:
1.Used Dell D630 laptop
2.Real CAT et3 Comm Adapter III(it's best quality cat et 3,not adapter 2,please check Communication port)
3.USB Cable (From device to your computer)
4.J1939/J1708 9PIN Cable (from device to your truck)
5.6PIN Cable (for old truck)
6.14PIN Cable(for new truck,optional)

Caterpillar ET 2019C is a good replacement for the CAT ET 2018b, 2019A,2019B Electronic Technician Diagnostic Software

Caterpillar ET 2019C is a good replacement for the CAT ET 2018b, 2019A,2019B Electronic Technician Diagnostic Software. 2019C Caterpillar Electronic Technician software With CAT ET 3 Cat caterpillar adapter 3 support caterpillar diagnostic till 2019.
Product Description 
CAT Caterpillar ET Diagnostic Tool from Caterpillar provide the capability to access Electronic Control Modules (ECMs) from a personal computer. Many job-critical tasks can be performed with an electronic service tool. The user can display the status of a group of parameters (temperatures, pressures, etc.) simultaneously, view active and clear logged diagnostics, display the current configuration of an ECM and much more. The service tool works with a communication adapter to allow connection to an ECM. A graphical interface makes this software quick to learn and easy to use. A separate pull-down menu for each function enhances the “ease of use.” The version and identification of the ECM is automatically retrieved and is displayed on a summary screen when the program is started. Diagnostic tests and calibrations can also be performed.
CAT Caterpillar ET Diagnostic Tool enable service technicians to reprogram ECMs, reconfigure control system parameters, fine tune performance or diagnose the root cause of a failure the first time. These powerful tools allow service personnel to display and analyze vital performance and health information from any system quickly and accurately. The service tool communicates with any system using ATA (J1708), J1939 or the Caterpillar proprietary data link networks. The service tools provide information and features needed to help a technician diagnose problems and perform repairs and to customize and personalize the operation of a product. By allowing customers to design flexibility and configurability into a product, Caterpillar service tools stretch beyond the capabilities of preprogrammed ECMs or onboard display systems.
Caterpillar ET Software 2019C Function:
This diagnostic app allows you to:
View active and logged diagnostics.
View events where irregularities occurred and were logged by the ECM.
View the status of a group of parameters (temperatures, pressures, etc.) simultaneously.
Record and log performance data.
Graph a group of status parameters.
View the current configuration of an ECM.
Change ECM configurations.
Perform diagnostic tests.
Perform calibrations.
Print reports and diagnostic results.
Please keep in mind that some ecm settings for example, speed limit requires factory password. The factory password generator is not included in this application

What’s New – 2019C
Indication of Selected Communications Adapter
The Professional Diagnostic Tools now displays the selected communications adapter when the service tool is disconnected. The adapter name is displayed in the status area at the bottom right of the service tool window.

End of Support for Windows 7
Microsoft is ending extended support for Windows 7 as of January 2020. The service tool will be ending support for Windows 7 as of the 2020A release.
What’s New – 2019B
Automatic Product Status Report (PSR) Upload
The service tool includes a new tool that automatically uploads Product Status Reports. The tool scans for newly generated Product Status Reports and uploads them when an internet connection is available. The default is that automatic report uploading is enabled. The Preferences dialog has an option to disable the tool.
What’s New
What’s New – 2019A
ECM Naming Changes
Certain ECMs connect to the service tool over two data links at the same time. The service tool shows a message popup when the ECM is only detected on one link. The service tool has been changed to add the text **INCOMPLETE** in the ECM name when the connection is incomplete. Service tool features that display a connection icon also use a new icon for an incomplete connection.
What’s New – 2018C
No significant new features or feature enhancements
What’s New – 2018B
CEOS Fleet Configuration File TOP
A CEOS (Customer Electronic Option Selection) Fleet Configuration File can be created/modified for an engine using the Service Tool. This is available in connected and disconnected mode.
Error When Launching Service Tool
There is a Microsoft issue with upgrading libraries during an installation involving certain versions of the C++ redistributable. After a successful service tool installation, when trying to run the service tool for the first time, one of the following errors may occasionally appear: “The entry point could not be located in api-ms-win-crt-runtime” or “The program can’t start because mfc140u.dll is missing from your computer.” If either of these messages is displayed, please let us know and we will send you to step by step troubleshooting guide. This procedure requires administrator rights.
Service Tool License Corruption Issues with Windows 10 Updates
Windows 10 updates 1709 and 1803 will corrupt service tool licenses. Future Window 10 updates may do the same
If either of license error messages is displayed, please let us know and we will send you to step by step troubleshooting guide.
What’s New -2018A
What’s New 2018A
Trainer Update – 988K XE Wheel Loader
The 988K XE Wheel Loader has been added to the Trainer application.
What’s New – 2017C
Preferences Option to Save a Product Status Report to PDF
The Preferences dialog for the Product Status Report has changed. The dialog contains a new checkbox to automatically save a Product Status Report as a PDF file when the report is created. The service tool will continue to automatically save Product Status Reports as an XML file.
What’s New – 2017B
Product Status Report Updates
The Product Status Report has been updated to include certain history features supported by the ECM, such as the after-treatment Regeneration History and the Service Test History.
Winflash Screen Update
The screen for the Winflash feature has been updated. A new Expand All button opens all sections of the screen to show all details for ECMs detected by WinFlash. A new Collapse All button hides all sections of the screen, except for header rows showing detected ECM names.

This Version CAT Caterpillar ET Diagnostic AdapterDisplay Status

CAT Caterpillar ET Diagnostic Adapter retrieve engine totals for fuel used, miles traveled, and hours Operated.
Caterpillar Electronic Technician display status of all parameters, such as engine speed, Throttle position, timing advance, fuel flow, etc.
The PC-based service tools from Caterpillar provide the capability to access Electronic Control Modules (ECMs) from a personal computer. Many job-critical tasks can be performed with an electronic service tool. The user can display the status of a group of parameters (temperatures, pressures, etc.) simultaneously, view active and clear logged diagnostics, display the current configuration of an ECM and much more. The service tool works with a communication adapter to allow connection to an ECM. A graphical interface makes this software quick to learn and easy to use. A separate pull-down menu for each function enhances the “ease of use.” The version and identification of the ECM is automatically retrieved and is displayed on a summary screen when the program is started. Diagnostic tests and calibrations can also be performed.
Languages currently supported: Danish, English, French, German, Italian, Japanese, Portuguese and Spanish.
CAT ET 3 function:
1. Display “Logged Event Codes” to show engine over speeds, High temperatures, fuel consumption, etc.
2. View ECM’s current configuration and change user settings
3. Perform diagnostic tests and calibrations, and calibrate
4. Electro-mechanical and electro-hydraulic components
5. Context sensitive help leads operator through every task Cat ET can perform
6. Data Logger and Data Log Viewer allows recording of ECM signals for delayed troubleshooting capability.
Functionalities Shows all operating conditions that cause high repair costs such as:
Over speeds, high temperatures, fuel consumption, transmission shift counts. This can provide awareness to change operator
Cat “ET Trainer” is now included in ET Program. It allows Users to train and practice using Cat ET without a Communications adapter or Electronic Control Module (ECM).This is a free feature of Cat ET.
Features
Display, graph and log status parameters.
Retrieve prognostic data including histograms, engine totals for fuel used and miles traveled.
View active diagnostics and clear logged diagnostics. View events where irregularities have occurred and have been logged by the ECM.
Perform calibrations to enhance performance of the ECM.
Customize the ECM with application-specific settings.
Over 100 custom Diagnostic, Information and Service features including:
– 2D and 3D Histogram plotting capability (engine software
support required).
– Custom Status screen groups
– Snapshots (Download and display snapshot data recorded by the
ECM)
– Configuration Aid that allows upload/download of same
configuration to multiple control modules
Caterpillar ET 2019C (replaces CAT ET 2018b, 2019A,2019B) Electronic Technician Diagnostic Software ：
Brand: Caterpillar
Region: WorldWide
Support Multi-languages：English, Chinese, Danish, French, German, Italian, Japanese, Portuguese, Russian, Spanish
Compatible OS: Windows 7 32 bit, Windows 7 64 bit, Windows 8/8.1 32 bit, Windows 8/8.1 64 bit, Windows 10 32 bit, Windows 10 64 bit
Publication date: 10.2019 year
Support All cars of CAT


Package 1：
1.Real CAT et3 Comm Adapter III (it’s real cat et 3,not adapter 2,please check Communication port)
2.J1939/J1708 Cable (from device to your truck)
3.ET software DVD （for windows XP or windows7 32bit system)


Package 2:
1.Real CAT et3 Comm Adapter III (it’s real cat et 3,not adapter 2,please check Communication port)
2.J1939/J1708 Cable (from device to your truck)
3.ET software DVD （for windows XP or windows7 32bit system)
4. 14PIN cable(diagnose part new cars)

WIFI CAT ET III Adapter Caterpillar ET3 New Arrival

The old bluetooth Caterpillar Electronic Technician has stopped production, and you may get the new WIFI CAT Caterpillar ET Diagnostic Interface adapter to replace it, CnAutotool.com has WIFI CAT ET III Adapter Caterpillar ET3 New Arrival.
WIFI Caterpillar ET3 Adapter III 317-7485 CAT ET III Diagnostic

Auto Scanner Tools CAT Communications Adapter III 317-7485 may be the most current generation on the CAT Communication Adapter group, and replaces the CAT Comm Adapter II.This function is necessary for some CAT ET (Electronic Technician) functions.
Actual 2015A Caterpillar ET3 Adapter III P/N 317-7485 Skilled Diagnostic Adapter for CAT with WIFI
This really is the only encouraged communication device for Auto Repair Software program CAT, and also the only datalink device that should permit you to correctly communicate with a CAT engine on dual datalinks.
Software program version: 2015A
2015A Caterpillar ET3 Adapter III Communication:
1. Makes it possible for communication involving service tools and engine controls making use of different data links such as J1939/11, DeviceNet (future release), CAT DataLink, and J1708 (ATA) vehicle networks;
2. Flash program permits adapter firmware upgrades as more attributes turn out to be obtainable;
3. Utilizes J1939/11, high-speed data link (a part of ADEM III controls), substantially minimizing flash occasions;
4. Automatically selects J1939/11 when flashing the engine (reduces the flash time around 80%, from 14 minutes to three minutes).
For anyone who is searching for wireless diagnostic interface for cat engines, please it is possible to pick this new WIFI CAT Caterpillar ET Diagnostic Tool III adapter from www.cnautotool.com , and you will get 5% off discount when you order it now.
Support car list of CAT Caterpillar ET Diagnostic Tool :

With the CAT Diagnostic Tool, you can:
View active and logged diagnostics
View events where irregularities occurred and were logged by the ECM
View the status of a group of parameters (temperatures, pressures, etc.) simultaneously
Record and log performance data
Graph a group of status parameters
View the current configuration of an ECM
Change ECM configurations
Perform diagnostic tests
Perform calibrations
Print reports and diagnostic results
For some machine and engine products, additional functionality has been included with the service tool program
Features
Display, graph and log status parameters.
Retrieve prognostic data including histograms, engine totals for fuel used and miles traveled.
View active diagnostics and clear logged diagnostics. View events where irregularities have occurred and have been logged by the ECM.
Perform calibrations to enhance performance of the ECM.
Customize the ECM with application-specific settings.
Over 100 custom Diagnostic, Information and Service features including:
- 2D and 3D Histogram plotting capability (engine software
support required).
- Custom Status screen groups
- Snapshots (Download and display snapshot data recorded by the
ECM)
- Configuration Aid that allows upload/download of same
configuration to multiple control modules
Customised Service Tool Options
Customized service tool name
Customized graphics for the splash screen and icons
Customized installation
Aftermarket differentiation, i.e., the tool for one customer does not work on the product of another customer.
Licensing options for customer management
Flash programming of the ECM(s)
Training demonstration allows familiarity with the tool's primary functions without connecting to ECM(s)
Perform customized diagnostic tests to identify harness problems, cylinder or component failures (Automatic Cylinder Cutout with cylinder to cylinder fueling comparison)
PC, Communication Hardware, and Cable Requirements
To run the service tool, the next PC, communication hardware, and cable requirements must be met. NOTE: The minimum PC Configurations should not be used as a standard when buying new personal computers for service tool purposes. If the existing equipment meets these minimum requirements, it will run the service tool.
PC Requirements
Recommended Configurations
PC containing a 2.0 GHz dual-core processor
3GB RAM
3GB of the available hard disk drive
DVD-ROM drive (optionally)
15.4-inch XGA Screen (1280x1024 compatible)
Microsoft Windows™ 7 Professional or Windows 8 Professional, Windows 10 Professional (Not tested with Home Edition) (Note: Windows 8 RT is not supported)
RS232 port with 16550AF UART or compatible (for use with Comm Adapter II)
USB 1.1 or 2.0 port (for use with Comm Adapter 3)
Ethernet RJ45 connector
Built-in pointing device or mouse
For security purposes, Microsoft Internet Explorer version 11 or newer or Microsoft Edge is recommended.
Note: The most recent version of Microsoft Internet Explorer may not be validated to work with the service tool.
Wi-Fi (for the Wireless Comm Adapter 3)
Minimum Configurations
PC containing a Pentium 2 GHz processor or greater
1GB RAM
500MB of an available hard disk drive
CD-ROM drive
Super VGA monitor or display (1024x768)
Microsoft Windows™ 7 Professional or Windows 8 Professional, Windows 10 Professional (Not tested with Home Edition) (Note: Windows 8 RT is not supported)
RS232 port with 16550AF UART or compatible (for use with Comm Adapter II)
USB 1.1 or 2.0 port (for use with Comm Adapter 3)
Ethernet RJ45 connector
Built-in pointing device or mouse
For security purposes, Microsoft Internet Explorer version 9 or newer is recommended. Note: The most recent version of Microsoft Internet Explorer may not be validated to work with the service tool.