SD Connect C4 connection problem-Das fault (1.1)-1.501.9878
The
mux is connecting with diagnosis computer both by lan cable or
wifi(passed and respond to all self tests).no lcd problems or
blocked!The fault comes when das try to initialize the mux green led
blinks about 10 second and this fault comes no matter is from das
standalone or launched from xentry .
Solutions:
You must change IP address in windows : 172.29.127.12
Go
into "Control Panel","Network Connection","Local Network
Connection">right click>properties>choose this one with
TCP/IP,select this,choose properties,choose manually ip and put this ip
"172.29.127.119",mask 255.255.255.0(as you will get when type ip),rest
of field,leave blank .
It was done !
Everything test well before send it out ,thanks
For more information,please visit our website: www.cnautotool.com
2018年12月26日星期三
2018年4月2日星期一
Super Engineer Version DTS Software DTSmonaco V8.3 for MB SD Connect C5 New Available
2018 Mercedes Benz Super Engineer DTS Software Mercedes Benz DTSmonaco
Super Engineer Version DTS Software DTSmonaco V8.3 for SD Connect C5 New Available
With the increasingly powerful software, the system requirements are getting higher and higher, Mercedes- Mercedes Benz Scanner Diagnostic Tool win7 system successfully come out With the Vediamo Mercedes-Benz engineer software exit, Super Engineer software DTS monaco has come, let Mercedes-Benz single, the whole car software number scan, the whole car code data read, really a key operation, minutes to keep the whole car data has been Not a dream.
What is the different between Vediamo and DTS maonaco?
Vediamo software can only read a single module data, code, permissions are too low;
DTS maonaco software is the development of Mercedes-Benz manufacturers software, the whole car data a key scan and save.
Data on the underlying data can be directly changed, second-hand module directly copy data replacement.
Can be automatically programmed, can automatically set the code completely out of online operation.
DTS-monaco Introduction
1.DTS-monaco is the official software used by Daimler-Benz development engineers.
2. DTS Monaco is a general engineering test terminal for diagnostic and controller functions of vehicle controllers. The name Monaco is derived from a modular analyzer for vehicular traffic.
3. DTS Monaco covers all tasks in all engineering, testing and production test preparation areas
4. In the Mercedes-Benz maintenance test, it has the greatest authority, Perfect support MB SD Connect C4 (SDconnect) and (Ecom) hardware (currently Das-xentry . Vediamo lower authority)
Special functions:
1.Quick Test; for the entire car ECU for rapid testing, testing at the same time you can choose to edit more features.
2. Variant Coding; with variant code to add VO-delete VO function.
3.ID identification; a key to read the entire car all the module programming number and save.
4. Complete Variant Coding; one-time reading of all vehicle ECU coding data, can be rewritten into the vehicle, completely off-line operation.
5. Diagnostic Services; Advanced features you can see the internal data of the module you choose, open the computer authorization (not driving authorization), activate the ECU, reset the ECU, modify the original frame number.
6.Flash programming; to achieve complete off-line programming,
7.Diagnostic Trouble Code; Diagnostic module DTC fault code.
8.ECU Exchange; two identical ECUs, which are exchanged by reading data to import data.
9.Symbolic trace: record the trace file, line repeatedly view, analyze the fault logic point.
Super Engineer Version DTS Software DTSmonaco V8.3 for SD Connect C5 New Available
With the increasingly powerful software, the system requirements are getting higher and higher, Mercedes- Mercedes Benz Scanner Diagnostic Tool win7 system successfully come out With the Vediamo Mercedes-Benz engineer software exit, Super Engineer software DTS monaco has come, let Mercedes-Benz single, the whole car software number scan, the whole car code data read, really a key operation, minutes to keep the whole car data has been Not a dream.
What is the different between Vediamo and DTS maonaco?
Vediamo software can only read a single module data, code, permissions are too low;
DTS maonaco software is the development of Mercedes-Benz manufacturers software, the whole car data a key scan and save.
Data on the underlying data can be directly changed, second-hand module directly copy data replacement.
Can be automatically programmed, can automatically set the code completely out of online operation.
DTS-monaco Introduction
1.DTS-monaco is the official software used by Daimler-Benz development engineers.
2. DTS Monaco is a general engineering test terminal for diagnostic and controller functions of vehicle controllers. The name Monaco is derived from a modular analyzer for vehicular traffic.
3. DTS Monaco covers all tasks in all engineering, testing and production test preparation areas
4. In the Mercedes-Benz maintenance test, it has the greatest authority, Perfect support MB SD Connect C4 (SDconnect) and (Ecom) hardware (currently Das-xentry . Vediamo lower authority)
Special functions:
1.Quick Test; for the entire car ECU for rapid testing, testing at the same time you can choose to edit more features.
2. Variant Coding; with variant code to add VO-delete VO function.
3.ID identification; a key to read the entire car all the module programming number and save.
4. Complete Variant Coding; one-time reading of all vehicle ECU coding data, can be rewritten into the vehicle, completely off-line operation.
5. Diagnostic Services; Advanced features you can see the internal data of the module you choose, open the computer authorization (not driving authorization), activate the ECU, reset the ECU, modify the original frame number.
6.Flash programming; to achieve complete off-line programming,
7.Diagnostic Trouble Code; Diagnostic module DTC fault code.
8.ECU Exchange; two identical ECUs, which are exchanged by reading data to import data.
9.Symbolic trace: record the trace file, line repeatedly view, analyze the fault logic point.
订阅：
博文 (Atom)