Mercedes Benz MB Star C3 vs C4

Mb Star C3: It requires a laptop so that you can troubleshoot your Mercedes-Benz via Xentry software. While on paper it is slower than MB Star C4, it has proven to be a very reliable and robust scanner that is not plauged with WiFI connectivity issues like the Star C4.
^{MB Star C4} is the latest Mercedes-Benz wireless multiplexers that can connect to your PC via wireless connection. Being the latest Diagnostic Scanner for Mercedes-Benz it works faster, once you resolve any connectivity issues that is.
Frequently Asked Questions
What is DAS? – Diagnostic Assistance System – This is the full diagnostic system for Mercedes-Benz vehicles. All functions for diagnosis including reprogramming, configuration, initialization, fault diagnosis and guided diagnostic tests are contained within DAS.
All control unit software (reprogramming calibrations) is contained within the DAS software which is distributed monthly via DVD media.
All access and functionality required in regard the configuration via SCN Coding and/or CVN Coding is covered.
What is WIS-NET? – Workshop Information System – This is the complete workshop information system as developed by DaimlerChrysler for use in the servicing of Mercedes-Benz vehicles. Contained within are installation instructions, procedures, functional and technical specifications. There is some linkage from certain procedures in DAS to respective documents in WIS.
What can Mercedes Star Diagnostic Tool do? The system offers total diagnostic coverage of all engine, chassis and body systems:
Reading and re-setting of diagnostic trouble codes (DTC)
Real-time reading of dynamic data
Full component activation clearing and re-setting of adaptation values
Coding of all engine, chassis, body and instrumentation modules
Key configuration
Procedure for fitting Mercedes- Benz accessories through the D2B ring and MOST bus
Total ASSYST / ASSYST + control (Active Service System) to update on board service history
What is Workshop Green Key? This is a unique one-time key from the factory which is necessary in certain situations such as:
Disabling a key track
Replacing the ECU
Replacing security related control units
Replacing EIS
Typically the workshop key and EIS must be ordered togheter and the green key is used to perform the final programing of the EIS.
What does it mean MARRYING  a VIRGIN ECU and EIS? The ME (ECU=Engine Control Unit)  and  EIS (Electronic Ignition System) control module are electronically permanently married to each other after 40 engine starts. There is no factory procedure to undo this. This means that a used engine EIS or DAS control unit cannot be used on another vehicle. A new control unit can be installed for testing provided the 40 engine starts are not exceeded. Note that the new control unit must be variant coded before it can be used. If the 40 engine start cycles are not completed successfully resetting the counter to 0 (removing the version coding) is possible if  you disconnect the power from the ECU for at least 45 minutes.
What model years does Star Diagnostic Scanner work with? The Star Scanner should work on cars from 1989 up to 2015 for Mercedes Cars, Buses, Trucks, Sprinter Vans, Smart cars, Etc.
What can I do with CnAutotool.com Star Diagnostic SD Connect Scanner C3 & C4?
Reading/Erasing Trouble Codes
Read Live Data
Adaption of Modules
Coding/Programming of Modules
Component Testing
Maintenance Information Consultation
What is Xentry? New software released by Benz Company after 04/2009 by diagnosis new cars. WIS.net : Workshop Information System EPC.net: Electronic Parts Catalogue STAR UTILITIES: the movement management system and self-test DAS: the automatically Diagnosis Assistance System ST Finder 2008: Part location finder
What is Smart TAN Code? It openes special function in DAS program with Smart cars 450/451/452/454 Developer model: Mercedes-Benz engineer mode, remove limitations and open more functions.
What is Benz Disassembly system? Video lessons to teach you how to remove each part from Benz cars with details order steps.
Which control units can Mercedes Benz Diagnostic Tool with Xentry troubleshoot?
Engines (All Gasoline & Diesel Systems)
Transmissions and Electronic Selector Modules
Airmatic and Active Body Control Suspension Systems
Traction Systems: ESP / ASR / ETS / ABS / BAS / SBC braking systems
Supplementary Restraint Systems (SRS) / Airbag, All body modules OCP / UCP / LCP / SCM / SKF / KFB / RCM / DCM’s
Drive Authorisation System
Sam (Signal Acquisition) Modules
Electronic Ignition System (EIS)
Pneumatic System Equipment and ATA functions
Air Conditioning / climate control Systems
Instrument Cluster
Tyre Pressure Control
Parktronic System
Keyless Go
D2b Command & Audio Gateway (D2B and MOST networks)
TV Tuner
Headlamp Range Adjustment
Seat Electronics
Rvc, RST & Vario Roof modules
Automatic Clutch S

Super Engineer Version DTS Software DTSmonaco V8.3 for MB SD Connect C5 New Available

2018 Mercedes Benz Super Engineer DTS Software Mercedes Benz DTSmonaco

Super Engineer Version DTS Software DTSmonaco V8.3 for SD Connect C5 New Available

With the increasingly powerful software, the system requirements are getting higher and higher, Mercedes- Mercedes Benz Scanner Diagnostic Tool win7 system successfully come out With the Vediamo Mercedes-Benz engineer software exit, Super Engineer software DTS monaco has come, let Mercedes-Benz single, the whole car software number scan, the whole car code data read, really a key operation, minutes to keep the whole car data has been Not a dream.

What is the different between Vediamo and DTS maonaco?
Vediamo software can only read a single module data, code, permissions are too low;
DTS maonaco software is the development of Mercedes-Benz manufacturers software, the whole car data a key scan and save.
Data on the underlying data can be directly changed, second-hand module directly copy data replacement.
Can be automatically programmed, can automatically set the code completely out of online operation.

DTS-monaco Introduction
1.DTS-monaco is the official software used by Daimler-Benz development engineers.
2. DTS Monaco is a general engineering test terminal for diagnostic and controller functions of vehicle controllers. The name Monaco is derived from a modular analyzer for vehicular traffic.
3. DTS Monaco covers all tasks in all engineering, testing and production test preparation areas
4. In the Mercedes-Benz maintenance test, it has the greatest authority, Perfect support MB SD Connect C4 (SDconnect) and (Ecom) hardware (currently Das-xentry . Vediamo lower authority)

Special functions:
1.Quick Test; for the entire car ECU for rapid testing, testing at the same time you can choose to edit more features.
2. Variant Coding; with variant code to add VO-delete VO function.
3.ID identification; a key to read the entire car all the module programming number and save.
4. Complete Variant Coding; one-time reading of all vehicle ECU coding data, can be rewritten into the vehicle, completely off-line operation.
5. Diagnostic Services; Advanced features you can see the internal data of the module you choose, open the computer authorization (not driving authorization), activate the ECU, reset the ECU, modify the original frame number.
6.Flash programming; to achieve complete off-line programming,
7.Diagnostic Trouble Code; Diagnostic module DTC fault code.
8.ECU Exchange; two identical ECUs, which are exchanged by reading data to import data.
9.Symbolic trace: record the trace file, line repeatedly view, analyze the fault logic point.