CNH DPA5 Kit Diagnostic Tool – Only US$387.00

 

CNH DPA5 Kit Diagnostic Interface:

It’s working 2 CAN and Kline ( for diagnostic CASE and New Holland with IVECO Engine with EASY under EST

New Holland Electronic Service Tool CNH DPA5 Description:

Electronic Service Tool (EST) – used by dealership technicians to connect with machines that have a Controller Area Network (CAN) BUS as part of the electronic system architecture.

Supported Languages: English, Italian, Russian, Polish, Spanish, French, Portuguese, German, Dutch, Danish.

 

Operating System: WinXP, Win7 32bit/64bit, Win8 32bit/64bit

 

With CNH DPA5 Kit Diagnostic Interface This Service Tool You Can:

• Check status of parameters;

• Retrieve faults;

• Run diagnostic tests;

• Make ECU and parameter programming;

• Monitor active and logged diagnostics;

• View and change ECU configuration;

• View diagnostic procedures and schematics.

• Troubleshoot problems;

• Use asist database;

• Run scope diagnostics;

E.A.S.y – additional engine diagnostic and download tool for connection directly to ECU to perform diagnostic, programming and ECU reload by K-Line protocol.

 
CNH Engine Download Tool operates from within the EST program to perform the following engine download operations:

• Provide Engine Control Unit (ECU) programing update capability;

• Provide blank ECU initialization and programming capability;

• Provide ECU programming reassignment for blank and other ECUs;

• Provide ECU download crash recovery.

NOTE: This DPA5 can perform diagnostic, programming and ECU reload by K-Line protocol with E.A.S.y software for Iveco engines.

Supported Brands:

New Holland (Agriculture and Construction);

New Holland FK (Fi at-Kobelco);

New Holland O&K (Orenstein & Koppel);

CASE (Agriculture and Construction);

STEYR;

KOBE-LCO;

Iveco (Astra) (articulated dump trucks only);

Flexi-Coil;

Sumitomo (S.H.I.).

The software is 9.4 / 9.2 engineering level,CNH EST8.6 software is dealer level.engineering level has more functions than dealer level and CNH 9.4 9.2 is with diagnostic procedure.

CNH DPA5 Software Display:

NOTE:
1.If you choose CNH EST 8.6 Dealer Level Software, we will provide you with a registration machine, and you can activate the software yourself

Attention : you must keep your laptop system date to 2018-01 , the laptop without any antivirus software before install the software
2.If you choose CNH EST 9.4 9.2 Dealer Level Software for 1 PC activation (we will remote help you installation by team viewer) Full license

The software is 9.4 / 9.2 engineering level,CNH EST8.6 software is dealer level.engineering level has more functions than dealer level and CNH 9.4 9.2 is with diagnostic procedure.

For more information please visit our website sale@cnautotool.com

Best Quality 2021B CAT Caterpillar ET 3 Diagnostic Adapter III

 

Best Quality 2021B CAT Caterpillar ET 3 Diagnostic Adapter III CAT ET Diagnostic Tool PLUS Lenovo X220 Laptop With WIFI

The old bluetooth cat et adapter iii have stopped production .the new cat caterpillar ET Diagnostic interface adapter will instead of it .

The Cat caterpillar ET 3 with the lenovo x220 laptop with wifi , We will install the software before ship, so you can get it work directly after you receive it.

Support：WIFI

Software version: 2021B

2021B is an upgraded version of 2020A , A represents the first quarter, and C is the software updated in the third quarter.

Support Multi-languages：English, Chinese, Danish, French, German, Italian, Japanese, Portuguese, Russian, Spanish
Support All cars of CAT

Caterpillar ET Software Function:
This diagnostic app allows you to:
View active and logged diagnostics.
View events where irregularities occurred and were logged by the ECM.
View the status of a group of parameters (temperatures, pressures, etc.) simultaneously.
Record and log performance data.
Graph a group of status parameters.
View the current configuration of an ECM.
Change ECM configurations.
Perform diagnostic tests.
Perform calibrations.
Print reports and diagnostic results.

 

Features
Display, graph and log status parameters.
Retrieve prognostic data including histograms, engine totals for fuel used and miles traveled.
View active diagnostics and clear logged diagnostics. View events where irregularities have occurred and have been logged by the ECM.
Perform calibrations to enhance performance of the ECM.
Customize the ECM with application-specific settings.
Over 100 custom Diagnostic, Information and Service features including:
- 2D and 3D Histogram plotting capability (engine software
support required).
- Custom Status screen groups
- Snapshots (Download and display snapshot data recorded by the
ECM)
- Configuration Aid that allows upload/download of same
configuration to multiple control modules

Customised Service Tool Options
Customized service tool name
Customized graphics for the splash screen and icons
Customized installation
Aftermarket differentiation, i.e., the tool for one customer does not work on the product of another customer.
Licensing options for customer management
Flash programming of the ECM(s)
Training demonstration allows familiarity with the tool's primary functions without connecting to ECM(s)

Perform customized diagnostic tests to identify harness problems, cylinder or component failures (Automatic Cylinder Cutout with cylinder to cylinder fueling comparison)

Caterpillar electronic technician 2020B with WinFlash future is an updated version of the caterpillar dealer diagnostic software that can help technicians to diagnose existing and potential problems with their electronically controlled Caterpillar Engines and Machines.

To get the vehicle information the Cat ET software must be connected to the Electronic Control Module (ECM). For this purpose, you need a suitable diagnostic link adapter (DLA), for instance, Genuine CAT Comm Adapter III

The list of supported CAT machines and engines can be found below(if your vehicle is missing, please contact us we will double check):
Engines:
Electric Power
Electric Power Generation
Industrial
Marine Power Systems
Oil and Gas

Machines:
Articulated Trucks
Asphalt Pavers
Backhoe Loaders
Cold Planers
Compactors
Dozers
Drills
Excavators
Feller Bunchers
Forest Machines
Forwarders
Harvesters
Hydraulic Mining Shovels
Knuckleboom Loaders
Material Handlers
Motor Graders
Off-Highway Trucks
Pipelayers
Road Reclaimers
Site Prep Tractors
Skid Steer and Compact Track Loaders
Skidders
Telehandlers
Track Loaders
Underground - Hard Rock
Underground - Longwall
Underground - Room and Pillar
Utility Vehicles
Wheel Dozers
Wheel Excavators
Wheel Loaders
Wheel Tractor-Scrapers

 

 

If you want to learn more about the CAT Caterpillar ET 3 ,you can contact with us : sale@cnautotool.com

The new third generation Porsche diagnostic tool – Porsche Piwis 3 Diagnostic Tool Piwis III

Porsche Piwis Tester III is the newest fully operational diagnostic equipment based on PIWIS vehicle interface and Porsche software. Piwis Tester III provides exclusive support for Panamera G2, Cayenne E3 and all 2017 model range and above also provides legacy support for older models.

It is the new third generation Porsche diagnostic tool, it’s update to modern user interface, more faster performance, also have: license automatic update, online view of the technical documents, fault finding guide, online programming, faster and more efficient work.

1.Piwis 3 With V40.600 Piwis III Software for Porsche Cars diagnostic & Programming.
2.Piwis 3 with developer mode software & TeamViewer Installed Lenovo Laptop Ready To Use, cover all piwis 2 functions.
3.With New DoIP Ethernet diagnostic technology,Supports Porsche Models after 2002

 

Top 4 Reason to get Tester III Diagnostic Tool :
1. Exclusive support for P0rsche third generation diagnostic PIWIS 3
2. New DoIP Ethernet diagnostic technology
3. Luxury car diagnosis, ultra low threshold
4. Support Porsche Models after 2002.
Update method : Send SSD back or buy a new SSD
 

PIWIS III with Piwis 3 Software Details:
1. Software Version:
Dual System: V40.600 + V38.200

V40.600(with Engineering software support online programming,but you should have an online account)
V38.200(with Engineering software support offline programming)

2. Functions: Diagnosis and Programming
3. Update: By SSD
4. Connection: Via USB or Wifi
5. Support Vehicles: Support all Porsche till 2021
6. Password for Laptop: 123456
7. Multi-Language: German, English, US English, French, Italian, Spanish, Japanese, Chinese, Russia, Portuguese, Nederlands
Piwis III Supports New & Old Cars:
All Porsche from 1998-2021:
1.Porsche 911(997) (991)
2.Boxster/Cayman (987)
3.Cayenne up to MY 2010
4.Cayenne from MY 2011
5.Panamera

Especially the latest models:
1.Paramera (971) 2021
2.Caynenne (92A) 2021
3.Macan (95B) 2021
4.911 (991) 2021

Also support All Other Old car models

Porsche PIWIS TESTER PIWIS3 Features & Functions :
1. New operating system and more intuitive software interface
2. New VCI, support for models with DoIP diagnostics after 2017
3. Maintenance, repair, control unit replacement, programming code
4. Login online anti-theft matching programming
5. Guided fault finding
6. Maintenance circuit diagram view
7. Engineer mode (development version) can support special functions such as installing, modify, Flash.

 

Piwis Tester 3 Lenovo (Second Hand) laptop details:
Brand: LenovoBrand: Lenovo
Model: Lenovo Yoga12
Processor: i5 CPU, 5300U，8G RAM
SSD：256GB
Screen: Touch Screen

Package Listing :
1× Piws 3 Tester
1× OBDII Cable
1× USB Cable
1× 256GB Software SSD
1× Lenovo S1 yoga12 I5 5300U 8GB

 
www.cnautotool.com

Autel IM608 IM508 Add 2021 Lincoln Navigator Key OK

 

Autel MaxiIM IM608, IM508 Key Programmer can support to add 2021 Lincoln Navigator smart keys via OBD successfully. Moreover, all keys lost & read password are supported as well. More details please check car list below.

IM608 IM508 Lincoln Navigator IMMO Function Car List

How to add a 2021 Lincoln Navigator Key with IM508?

Here’s taking Autel IM508 to program a keyless aftermarket key on 2021 Lincoln Navigator for reference.

Connect OBD cable to the port under driver-side dash, go access

IMMO >> Accept >> Ford >> Manual selection >> Lincoln >> Navigator >> 2020- >> Smart key >> Yes >> Hot function >> Add smart key(guided) >> Start to begin

Read the notice, press “Yes”.

The function will not erase existing keys.

Specify vehicle alarm state(off/on).

Wait 10mins to bypass the security system…

Once complete, confirm number of keys in system and continue.

Insert the new key into key coil and continue.

(This vehicle key coil is in the Armrest box)

Key learned success!

Once learned, you can go on programming next one or exit directly.

Test the new key.

All functions work.

A perfectly programmed smart key has done.

Details :https://www.cnautotool.com/goods-6873-Autel-MaxiIM-IM608-Diagnostic-Key-Programming-and-ECU-Coding-Tool-Replaces-Auro-OtoSys-IM600–MX808IM.html

How to solved Mercedes Star Diagnostic Xentry Das License Key is Corrupted

 

MB Star Diagnosis Software update to 2021.09 MB Star C4 SDConnect xentry software. Mercedes Star Diagnosis Software have Das license key is corrupted met by customer who order 2021.07 xentry diagnostic software. CnAutotool.com sharing Mercedes Star diagnosis Xentry Das license key is corrupted solution as following.
2021.09 Mercedes Star Diagnosis Software Xentry DAS Software for MB SD Connect C4/C5

Hello,
I got 07.2021 Xentry DAS Windows 7 software HDD is giving me the following massage:
winLicense
your license key is corrupted
please contact support@…
How to solved it? Any help can offer?

Best Regards
Technician have been check the error, this is DAS need activation.
Mercedes Benz Diagnostic Software Xentry Das license key is corrupted solution:
Xentry/DAS activation:
Step 1: Run StartKeyCenter to get ID for activation
Open “StartKeyCenter” on Desktop, to get the SD connect c4 Hardware ID and App ID

Complete Licence information (Hardware ID, App ID, StartDay, ExpirationDay), then click “Generate” to get License String

Copy License String, then go to “StartKeys”, click “Enter” to read StartKey, then “Save” data

Step 2: Reactivate Xentry/DAS
Go to Local Disk C:/ ProgramData/ LicDir, the copy and paste “lic_key_2.dat”, re-name as “lic-key_2.x4711”
Xentry Your License key is corrupted 5 Mercedes Star Diagnostic Xentry Das License Key is Corrupted Solution
Setup Properties of “lic-key_2.x4711”, select Read-only
Then open XENTRY Diagnostics Openshell and close it
(NOTE: this avoids the activation code to be lost and reactivate XENTRY)
More question about Mercedes benz star diagnostic tool mb star c4 sd connect Xentry diagnostic software just keep your order number to contact us freely with sale@cnautotool.com .