WOYO PDR007 Body repair tool information for you

In this publication, you can find a simple tool to repair the paintless dent of the car body - WOYO PDR007 repair tool. It will be a good tool to save time and money in the workshops.



Description of the WOYO PDR007 repair tool:

1. Simple, easy to use, low learning cost

2. Compared with the traditional way of demolition and repair, accelerate the delivery 6 times faster of the owners, improve the use of the store, the quick recovery of the investment

3. Two operating modes to adapt to different needs:

   ① The time mode

   ② Power mode

4. High precision control, quality assurance, operational safety

5. Large display screen, precise control, real time monitoring

6. Voltage: 220 ~ 240V

    Frequency: 50 / 60Hz

    Fuse: 10A

    Maximum voltage: 250V

    Frequency: 40 ~ 45 KHz

    Max Power ≈ 800W

    Europ plug

    Menu in English

Incorrect operation:

1. While in use, do not press hard to avoid worsening the dent.

2. Do not start the operation from the center of the dent

3. Do not operate in a sliding way

4. Do not work on the same dent too long

5. While in use, do not touch the dent to avoid burns

6. Ensure that there is no air gap between the repair head and the car body during operation

Note before the operation:

1.Do not use this device in patients with pacemakers and various metal prostheses.

2. Before using the equipment, wear a protective mask, protective gloves and a jumpsuit to prevent burns during operation.

3. Do not use any metal items such as watches, necklaces, keys, belt buckles, coins, zippers, etc.

4. The equipment should not be used in conductive powder, spraying work area, chemical fuel working area, high temperature zone and high humidity area.

5. When the device is turned on, combustible material can not be placed next to it.

6. Before using the equipment, have a fire extinguisher in case of incorrect operation.

7. It is not necessary to install air bags near the use of this tool.

8.If the device is connected to the power supply, it is necessary to protect the equipment. Unplug the AC power outlet when not in use.

9. Storage equipment, the temperature should be maintained at 0 ~ 50 ℃, when the mobile device to avoid vibration.

Note in operation:

1. Repair the head in the repair of the damaged body process, repair the temperature of the head and the body will rise quickly, in the equipment, body, repair head without refrigeration, please do not touch, so as not to burn.

2. Repair the head in the repair process, repair the head and body temperature will increase rapidly, the individual damaged parts do not work for a long time (every 1 ~ 15 seconds after the operation with a wet towel repeatedly clean the damaged parts of the cooling), high temperature painting to avoid hurting.

3.Repair the process, repair the temperature of the head and body will increase rapidly, the car experiences a weak weakening moment, during the repair of the head does not have to press the action, so as not to soften the moment caused by the increased depression.