Xentry connect C5 Mercedes DOIP device

After 2015, all Star Diagnosis equipment is no longer supported. First of all, this means that there is no update of the diagnostic data for the newest cars and their systems, as well as the lack of the possibility of coding and programming of electronic units due to the backlog of the software data level in the device, from data in the electronic control units of the car.

Already at the end of 2014, at most dealerships, almost all of the previously used Star Diagnosis Compact4 with SDConnect DoIP multiplexers were almost completely removed. Instead, dealers received Xentry Kit kits, which include the latest Xentry Connect multiplexers and Xentry Tab tablets from Panasonic. Tablets are custom-made, although they also have a "civilian" version - the Panasonic Toughbook CF-D1, somewhat inferior in terms of battery life to the original Xentry Tab, but it has a much more powerful configuration.

And the most important is mercedes produce new car with DOIP Protocol!

What is DoIP Protocol .

Doip is Diagnostic Communication over Internet Protocol

Short and simple: “DoIP is the packaging of diagnostic messages

in Ethernet frames for communication of a diagnostic tester with a vehicle”

    *DoIP is a standardized diagnostic transport protocol according to

ISO 13400 (see the note below)

    *DoIP is used in combination with the standardized diagnostic protocol

UDS (ISO 14229-5: UDSonIP)

    *Services of UDSonIP are identical to UDSonCAN
    *DoIP with Ethernet 100 Base-TX instead of CAN enables substantial

higher bandwidth

    *Vehicle access with DoIP is backwards compatible using discretionary

pins of the existing diagnostic connector

    *DoIP enables easy integration into various network structures,

even with WLAN



The DOIP Requet a powerful device than old one beofore 2015 . so we should have the new one Xentry connect C5 to instead of old one like SD CONNECT C4 MB STAR C3 and fake sd connect c5.

The SD CONNECT C4 MB STAR C3 and fake sd connect c5 couldn't support DOIP .

that means it can't works on new mercedes car like W222 S-class!

So if your workshop is focused mercedes, , update your device first, like the dealer use the The xentry connect to help your Job!

Mercedes Xentry connect C5 for sale on www.cnautotool.com now


http://www.cnautotool.com/goods-5102-MB+SD+C5+Star+With+Vediamo+V050006+Engineering+Software+Plus+EVG7.html

This is DOIP in Xentry software!